Is there any difference between game card and playing card?
1. The number of playing cards is relatively fixed, and the typography has little change.
2. The number of game cards can be more or less, depending on the game design, there is no limit.
3. The process of the game card is simpler than that of the playing card, because the use place is relatively simple, there are many playing card processes, and the quality requirements are high.
4. However, there are many similarities between the two, and the technology is basically the same, except for the different use occasions in different places.

How to solve the problem of paper
wrinkling in game card printing
Did you know that in the printing process of the game card, due to the lack of air conditioning, uneven stacking of paper, or due to the edge of the paper waves and static electricity, etc., the paper will wrinkle. Feida and the incorrect setting of paper transmission will also lead to paper wrinkling. In order to ensure that the paper is kept flat during the printing process, a proper air conditioning environment should be maintained during the transportation and storage process. The paper is very sensitive to the change of humidity, which is like the reason why the temperature should be maintained at 20-22 ℃, and the humidity should be 50% - 55%.
Paper wrinkling may also be caused by improper setting of the machine (such as Feida setting). Among these reasons, incorrect setting of the front gauge, too large pulling force of the side gauge, too heavy pressing of the pressboard or too strong blowing of the front edge, improper setting of the blowing above the pressing roller, etc. are all factors that cause wrinkling. In addition, poor teeth gripping or dirty teeth gripping pad, too heavy or uneven printing pressure Can cause paper to wrinkle.
Solution:
1. Try to choose high quality flat paper,
2. Check and adjust the front gauge correctly,
3. Check and adjust the edge gauge correctly,
4. Pressboard cannot be set too low,
5. Reduce the air blow at the front edge of the board,
6. Carefully adjust the paper pressure wind,
7. Pay special attention to the horizontal position of the paper into the teeth,
8. Check, clean and adjust teeth properly.
Notes on made to game card
1.Be sure to choose a more reliable printing game card factory
Some people may think it‘s too simple. There are almost a lot of printing factories in every city. As long as it‘s rich, it‘s nothing. However, to make a better game card is not so simple, the selected printing unit must be very good in software and hardware. To judge whether it is up to the standard, the simplest thing is to see the establishment time of the enterprise, the situation of customers, etc.
2.Special attention should be paid to the preliminary design work.
The design is the soul of the whole game card, in the early design process must be particularly careful. In addition to trying to portray a certain animation modeling object, there is also a market perspective to consider how to make more potential buyers like. This requires some experience.
3.Game card of Materials must be selected well
In the market, we can often see some very cheap game card products bought by children. The paper is rough, and there is no very good laminating operation, so the experience is very poor. If you want to make a better game card, you must choose a good material.